Take the skin_test folder from: vehicle/truck/upgrade/paintjob/fiat_690 and transfer it to your desktop.

Rename the folder by replacing the word test with a word of your liking, delete all the tobj files leave only the DDS which are the templates of all the truck parts, skin all the templates to your liking and save in DDS without changing the name.

At this point you need to create the tobj files I use BEM.

Refer to the attached image folder.

After creating the tobj files put the renamed folder in paintjob.

At this point go to: Def/vehicle/truck/fiat6/paint_job transport the two files skin_test.sii
and skin_test_setting.sii and replace the word test with the one you assigned to the previous folder obviously the files sii must also be renamed the content by replacing only the word test.

Then open the accessories folder you will find the sii skin_test.sii file transfer it to the desktop by first creating an accessories folder on the desktop and then transfer the skin_test.sii file inside it

Go to edit replace TEST with the name you created and click replace all.

Insert the two files sii and the accessories folder in Def/vehicle/truck/fiat6/paint_job

and the job is completed.

For the 2-axle trailer you only have to work in def paintjob on the files sii.


I hope I was clear
